Powis Parker FastBack Model 11 Especificaciones descargar pdf (Pagina 26)

26 FASTBACK 9 USER’S MANUAL, 203860 Rev. A

TROUBLESHOOTING - ERROR MESSAGES

XIII

Possible Cause Solution

The operator pressed the Bind button without inserting a

book into the binding recess.

Place a book into the machine and then press the Bind

button.

Thesheetsarenotfullyjustiedagainsttherightsideofthe

binding recess.

Taptheedgesofthesheetsuntilthebookisushagainst

the right side of the binding recess prior to pressing the

BIND button.

The book sensor is damaged Contact Powis Customer Service for service.

Possible Cause Solution

You are trying to bind too many sheets with the medium strip. Remove some sheets.

Possible Cause Solution

You are trying to bind too many sheets with a narrow strip. Remove some sheets or use a medium width strip.

There is no strip in the binding recess. Insert a medium strip.

Possible Cause Solution

You are trying to bind too few sheets with a medium strip. Add some sheets or use a narrow width strip.

There is no strip in the binding recess. Insert a narrow strip.

Possible Cause Solution

The strip is inserted into the machine backwards. Make sure the short end of the strip is vertical and the

longendofthestripisat.

Possible Cause Solution

Machine needs technical attention. Turn the machine off and then back on. If the error still

appears contact Powis Technical Support.

• Error Message: “INSERT BOOK”

Possible Cause Solution

The strip is too wide for the amount of sheets placed in the

binding recess.

Add more sheets or use a narrower width strip.

The strip is not folded. Make sure to fully fold the strip into a 90 degree angle.

The strip is not lined up properly. Makesurethestripandthesheetsarejustiedagainst

the back of the binding recess.

• Error Message: “USE SMALLER SIZE”

• Error Message: “BOOK TOO THICK”

• Error Message: “USE MEDIUM SIZE”

• Error Message: “USE NARROW SIZE”

• Error Message: “REVERSE STRIP”

• Error Message: “MACHINE ERROR XX”

1 2 ... 21 22 23 24 25 26 27 28 29 30

Sin comentarios

Powis Parker FastBack Model 11 Especificaciones Pagina 26